-
Configure your fiberglass silos in a few steps through our new configurator.
- Choose the model and storage capacity from our wide selection of silos.
- Select the fiberglass bottom that suits to your needs.
- Choose the appropriate top lid for your loading method.
- Finally select the accessories from our wide range.
-
Truck Tank for the transport and the distribution of compound feed and cereals, mounted on 2 wheels axle and feed is discharged by a side-mounted auger. The truck is provided with a joint connected to tractor power take-off and with the discharge control. Standard available colors: ivory white, beige colors, or Agritech company colors (green and red)
-
Cooling Box in fiberglass-coated polyurethane for deadstock Mod AGRICOOL120 and suitable for storing animal carcasses (chickens, piglets, lambs, rabbits) compose of:
- Cooling Box designed with a double layer of polyurethane fiberglass with 40mm thickness.
- Stainless steel accessories, rubber seal, engine-compound cooling evaporator system with special acid treatment.
- Top opening window of diam 400mm.
- A large front opening gate.
- Stainless steel step.
- 220-volt power for the cooling system;
- Engine cover produced in stainless steel with a double stainless steel ventilation grille;
- Temperature Adjustment from 10° to -12° degrees
- Digital box for temperature regulation;
-
Module in reinforced fiberglass & polyurethane for weaning piglets. Mod. FIBERBOX120, complete with:
- Insulated polyester and polyurethane box with a 40 mm layer,
- Two electric coils embedded in the floor for heating the FIBERBOX120
- A fan with shutter,
- Electronic control board temperature probe
- Exit Door
- Polyester basin for the collection of manure and slats (for the outdoor park).
- PVC barrier (for outdoor park); ;
- Stainless steel door to allow piglets access to the outdoor park;
- A stainless-steel feeder.
- Two cup drinkers in stainless steel inox,
- Inside lamp.
- Stainless steel bolt and screws;
- Beige color.
- The product is supply assembled.
-
Truck screw conveyor - TYPE France - MOD. CCMC202, diameter 200 mm., Length 12 mt. produced in hot dip galvanized steel, including three-phase electric motors 380 V. 50 Hz. at the base, big receiving hopper mm. 1000 x 2000 without cover, with a reversing switch and a lifting gear. It is composed by:
- Equipped with 380 V. three-phase engine, HP 10.
- Carter cover engine.
- Large tilt hopper, hot galvanized, mm dimensions. 1000 x 2000 with protective cage.
- Switch and inverter to change the direction of rotation of the screw.
- Stainless steel cable.
- The last piece of the screw can be folded on a 3-metre-long cart;
- 3 intermediate bearings with Teflon rings to support the spiral with greaser
- Telescopic drawbar.
- Hitch ring to drag the screw on a carriage, 45 mm diameter.
- All machines are equipped with a plate, welded on the machine itself, which allows the identification of the screw;
- Assembly instructions.
-
Fiberglass shelter for 16-20 calves, Mod. SPHERIBOXC produced in polyester fiberglass with metal fence and complete with:
- Nr.1 Polyester fiberglass Box with high mechanical resistance.
- Nr.1 Hot galvanized steel fence for SPHERIBOXC.
- Nr.1 Front head feed racks with 8 cattle.
- Nr.2 Side head feed racks with 4 cattle (each one).
- Nr.1 Reinforcement arch in deep hot galvanized steel.
- Nr.2 Hay rack in deep hot galvanized steel for SPHERIBOXC.
- Nr.4 Nipple buckets holders (for 4 nipple buckets).
- Nr.4 Water buckets holders (for 4 water buckets).
- Nr.1 Spacing Bar.
- Nr.2 Large chimneys in fiberglass and galvanized steel for the natural aeration (Mod CAMET).
- Nr.2 Extendable side gates for the access to the interior of the fence.
- Nr.2 Lifting hook with reinforced counter-plate.
- Nr.4 Fiberglass feeders with supports in galvanized steel.
- Nr.16 Water Buckets.
- Nr.16 Nipple Buckets.
- Nuts, bolts and mastic for assembly.
- Assembly Instruction.
- White or green colors.
- Box: 4300 mm. X 4300 mm. X h. 2180 mm.
- Fence: 3830 mm. X 3420 mm. X h. 1150 mm
-
- The weighing system AGRISCALE-SP201 is very simple and consists of load cells preassembled on a compatible tool for the legs of the silo and a digital weight indicator.
- Through the display, it can be read the level of the product contained in the silo in order to control immediately the product inside.
- In addition, the system automatically memorizes daily loads and unloads of the stored products up to 400 operations.
- The is available the version with 3-cell or 4-cell.
- The maximum range of each cell is 5000 KG
-
- Transfer augers to convey granular fertilizer, cereal and seeds. To be mounted on all agricultural trailers.
- Equipped with hydraulic motors complete with a hand winch for lifting and all fittings for the assembly on trailer; supplied with 2 oil tubes of 5m each.
- The 4-metre version can be folded very easily and if it does not come used, it can be reclined against the wall of the dumpster.
- Available in hot deep galvanised steel or in stainless steel and diameter of 150mm or 200mm.
-
Fiberglass shelter for 12 calves, Mod. AGRIBOX12C produced in polyester fiberglass with metal fence and complete with:
- Nr.1 Polyester fiberglass Box with high mechanical resistance.
- Nr.1 Hot galvanized steel fence for AGRIBOX12C.
- Nr.1 Front head feed racks with 8 cattle;
- Nr.1 Hay rack in deep hot galvanized steel for AGRIBOX12C.
- Nr.2 Nipple buckets holders (for 4 nipple buckets).
- Nr.2 Water buckets holders (for 4 water buckets).
- Nr.1 Spacing Bar.
- Nr.2 Extendable side gates for the access to the interior of the fence.
- Nr.1 Lifting hook reinforced counter-plate.
- Nr.2 Back side sliding windows for aeration.
- Nr.2 Fiberglass feeders with supports in galvanized steel.
- Nr.8 Water Buckets.
- Nr.8 Nipple Buckets.
- Nuts, bolts and mastic for assembly.
- Assembly Instruction.
- White or green colors.
- Box: 4200 mm. X 3200 mm. X h. 1850 mm.
- Fence: 3100 mm. X 3420 mm. X h. 1150 mm
-
Fiberglass shelter for 10 calves, Mod. AGRIBOX10C produced in polyester fiberglass with metal fence and complete with:
- Nr.1 Polyester fiberglass Box with high mechanical resistance.
- Nr.1 Hot galvanized steel fence for AGRIBOX10C.
- Nr.1 Front head feed racks with 8 cattle;
- Nr.1 Hay rack in deep hot galvanized steel for AGRIBOX10C.
- Nr.2 Nipple buckets holders (for 4 nipple buckets).
- Nr.2 Water buckets holders (for 4 water buckets).
- Nr.1 Spacing Bar.
- Nr.2 Extendable side gates for the access to the interior of the fence.
- Nr.1 Lifting hook reinforceded counter-plate.
- Nr.2 Back side sliding windows for aeration.
- Nr.2 Fiberglass feeders with supports in galvanized steel.
- Nr.8 Water Buckets.
- Nr.8 Nipple Buckets.
- Nuts, bolts and mastic for assembly.
- Assembly Instruction.
- White or green colors.
- Box: 3600 mm. X 3200 mm. X h. 1600 mm.
- Fence: 3100 mm. X 3420 mm. X h. 1150 mm
-
- Fiberglass container for bulk product, suitable for storing livestock feed, wood pellets and plastics granules. White color or other color on request.
- Complete transparent strip for product check, top lid with manual opening system from the ground and sliding gate.
- Capacity Mc 3 (almost 20 quintals).
- The CUBO3 silo is equipped with a 4-foot metal frame structure produced in hot deep galvanized steel.
-
Fiberglass shelter for 5 calves, Mod. AGRIBOX5C produced in polyester fiberglass with metal fence and complete with:
- Nr.1 Polyester fiberglass Box with high mechanical resistance.
- Nr.1 Hot galvanized steel fence for AGRIBOX5C.
- Nr.1 Front head feed racks with 5 cattle;
- Nr.1 Hay rack in deep hot galvanized steel for AGRIBOX5C.
- Nr.5 Nipple buckets holders.
- Nr.5 Water buckets holders.
- Nr.1 Spacing Bar.
- Nr.5 Water Buckets.
- Nr.5 Nipple Buckets.
- Nr.1 Extendable side gate for the access to the interior of the fence.
- Nr.1 Lifting hook with reinforced counter-plate.
- Nr.1 Back side sliding window for aeration.
- Nr.1 Fiberglass feeder with supports in galvanized steel.
- Nuts, bolts and mastic for assembly.
- Assembly Instruction.
- White or green colors.
- Box: 3200 mm. X 2200 mm. X h. 1600mm.
- Fence: 2080 mm. X 2060 mm. X h. 1150 mm.
-
- Fiberglass container for bulk product, suitable for storing livestock feed, wood pellets and plastics granules thanks to inclination of 60° that facilitates the fall of products.
- White color or other color on request.
- Complete transparent strip for product check, top lid with manual opening system from the ground and sliding gate.
- Capacity Mc 2,7 (almost 18 quintals).
- The CUBO2,7 silo is equipped with a 4-foot metal frame structure produced in hot deep galvanized steel.
-
- Fiberglass container for bulk product, suitable for storing livestock feed, wood pellets and plastics granules. White color or other color on request.
- Complete transparent strip for product check, top lid with manual opening system from the ground and sliding gate.
- Capacity Mc 2 (almost 13 quintals).
- The CUBO2 silo is equipped with a 4-foot metal frame structure produced in hot deep galvanized steel.
-
Fiberglass shelter for 3 calves, Mod. AGRIBOX3C produced in polyester fiberglass with metal fence and complete with:
- Nr.1 Polyester fiberglass Box with high mechanical resistance.
- Nr.1 Hot galvanized steel fence for AGRIBOX3C.
- Nr.1 Front head feed racks with 3 cattle;
- Nr.1 Hay rack in deep hot galvanized steel for AGRIBOX3C.
- Nr.3 Nipple buckets holders.
- Nr.3 Water buckets holders.
- Nr.1 Spacing Bar.
- Nr.3 Water Buckets.
- Nr.3 Nipple Buckets.
- Nr.1 Extendable side gate for the access to the interior of the fence.
- Nr.1 Lifting hook with reinforced counter-plate.
- Nr.1 Back side sliding window for aeration.
- Nr.1 Fiberglass feeder with supports in galvanized steel.
- Nuts, bolts and mastic for assembly.
- Assembly Instruction.
- White or green colors.
- Box: 2450 mm. X 1760 mm. X h. 1400 mm.
- Fence: 2080 mm. X 1710 mm. X h. 1150 mm.
-
- Screw conveyor Mod. CAG produced in hot deep galvanized steel with joint and equipped with the carter engine.
- The length of the screw conveyor is 4 Mt.;
- It is suitable for filling the feeder trucks.
- The screw is available with the diameter of 100mm, 120mm or 150mm;
-
Fiberglass shelter for pigs, Mod. AGRIBOX5-P produced in polyester fiberglass complete with:
- Nr.1 Polyester fiberglass Box with high mechanical resistance.
- Nr.1 Spacing Bar.
- Nr.1 Lifting hook with reinforced counter-plate.
- Nr.1 Back side sliding window for aeration.
- Nuts, bolts and mastic for assembly.
- Assembly Instruction.
- White or green colors.
-
Fiberglass Shelter for a calve Mod. AGRIBOX1C XL produced in polyester fiberglass with metal fence and complete with:
- Nr.1 Polyester fiberglass Box with high mechanical resistance.
- Nr.1 Hot galvanized folding steel side fence for AGRIBOX1C XL.
- Nr.1 Front access gate with its bolt.
- Nr.1 Nipple bucket holder.
- Nr.1 Water bucket holder.
- Nr.1 Wood Spacing bar.
- Nr.1 Set of double anti-chocking device.
- Nr.1 Set of front wheels for the transport.
- Nr.1 Drag Handle in galvanized steel.
- Nr.1 Stainless steel trough for hay and feed.
- Nr.1 Bucket with nipple.
- Nr.1 Bucket for water.
- Nuts and bolts for assembly.
- Assembly Instruction.
- White or green color.
- Box: 2000 mm. X 1200 mm. X h.1420 mm.
- Fence: 1350 mm. X 1150 mm. X h. 930 mm
-
- Fiberglass square tank for liquids Mod. AC provided with the cover.
- Available in the model from 500 lt., 1000 lt. to 2000 lt.
- Suitable to contain different types of liquid products and it is perfectly smooth inside.
-
- Dust Collector in fiberglass Mod. RAPOL with steel support and inside filter, removable dust bag and connection kit with breathing pipe of Diam. 160mm.
-
Fiberglass Shelter for a calve Mod. AGRIBOX1C produced in polyester fiberglass with metal fence and complete with:
- Nr.1 Polyester fiberglass Box with high mechanical resistance.
- Nr.1 Hot galvanized folding steel side fence for AGRIBOX1C.
- Nr.1 Front access gate with its bolt.
- Nr.1 Nipple bucket holder.
- Nr.1 Water bucket holder.
- Nr.1 Wood Spacing bar.
- Nr.1 Set of double anti-chocking device.
- Nr.1 Set of front wheels for the transport.
- Nr.1 Drag Handle in galvanized steel.
- Nr.1 Stainless steel trough for hay and feed.
- Nr.1 Bucket with nipple.
- Nr.1 Bucket for water.
- Nuts and bolts for assembly.
- Assembly Instruction.
- White or green color.
-
- Fiberglass Wheelbarrow with Volume 0,3 Mc. (capacity 180 Kg) with 3 wheels.
- Available in the models with full wheels or inner tube wheels.
-
- High volume fan with driven belt.
- Motorization of 1.5HP, maximum air flow 40.000 mc/h.
- Produced in hot deep galvanized steel with anti-corrosion aluminum alloy blades.
- Product Dimensions: 1380 mm. X 1380 mm. X h. 450 mm
- The product is assembled.
-
- Cyclone in hot deep galvanized steel with fiberglass hat Mod. CICPLA with side filling.
- Produced in hot deep galvanized steel with elevate resistance.
Have you subscribed our NEWSLETTER?
Agritech S.r.l., being since 1987 a European Leader in the processing and production of fiberglass silos for the storage of materials and by distributing a wide range of equipment to satisfy specific needs of customers in the agricultural and industrial sectors, in Italy and Worldwide.
Informations
Address: Via Rimembranze, 7 – 25012 Calvisano (BS) ITALY
Email: agritech@agritech.it
Phone: +39 030 99 68 222 r.a.
Fax: +39 03099 68 444
Customer Service
Monday – Friday – 08:00 / 12:30 – 13:30 / 18:30
Saturday – 08:00 / 12:00
Sunday – Closed
100% clean energy
Agritech, thanks to the photovoltaic panel plant in its production plants, is able to meet the company’s needs using only clean energy and operating in full respect of the environment.
© Copyright 2020 | Agritech srl | PI: 01532340989 | Privacy/Policy | Conditions of selling | Cookies | Developed by Feder.