-
Configure your fiberglass silos in a few steps through our new configurator.
- Choose the model and storage capacity from our wide selection of silos.
- Select the fiberglass bottom that suits to your needs.
- Choose the appropriate top lid for your loading method.
- Finally select the accessories from our wide range.
-
Fiberglass shelter for 5 calves, Mod. AGRIBOX5C produced in polyester fiberglass with metal fence and complete with:
- Nr.1 Polyester fiberglass Box with high mechanical resistance.
- Nr.1 Hot galvanized steel fence for AGRIBOX5C.
- Nr.1 Front head feed racks with 5 cattle;
- Nr.1 Hay rack in deep hot galvanized steel for AGRIBOX5C.
- Nr.5 Nipple buckets holders.
- Nr.5 Water buckets holders.
- Nr.1 Spacing Bar.
- Nr.5 Water Buckets.
- Nr.5 Nipple Buckets.
- Nr.1 Extendable side gate for the access to the interior of the fence.
- Nr.1 Lifting hook with reinforced counter-plate.
- Nr.1 Back side sliding window for aeration.
- Nr.1 Fiberglass feeder with supports in galvanized steel.
- Nuts, bolts and mastic for assembly.
- Assembly Instruction.
- White or green colors.
- Box: 3200 mm. X 2200 mm. X h. 1600mm.
- Fence: 2080 mm. X 2060 mm. X h. 1150 mm.
-
- Fiberglass container for bulk product, suitable for storing livestock feed, wood pellets and plastics granules. White color or other color on request.
- Complete transparent strip for product check, top lid with manual opening system from the ground and sliding gate.
- Capacity Mc 2 (almost 13 quintals).
- The CUBO2 silo is equipped with a 4-foot metal frame structure produced in hot deep galvanized steel.
-
Truck Tank for the transport and the distribution of compound feed and cereals, mounted on 2 wheels axle and feed is discharged by a side-mounted auger. The truck is provided with a joint connected to tractor power take-off and with the discharge control. Standard available colors: ivory white, beige colors, or Agritech company colors (green and red)
-
- Screw conveyor Mod. CAG produced in hot deep galvanized steel with joint and equipped with the carter engine.
- The length of the screw conveyor is 4 Mt.;
- It is suitable for filling the feeder trucks.
- The screw is available with the diameter of 100mm, 120mm or 150mm;
-
Truck screw conveyor - TYPE France - MOD. CCMC202, diameter 200 mm., Length 12 mt. produced in hot dip galvanized steel, including three-phase electric motors 380 V. 50 Hz. at the base, big receiving hopper mm. 1000 x 2000 without cover, with a reversing switch and a lifting gear. It is composed by:
- Equipped with 380 V. three-phase engine, HP 10.
- Carter cover engine.
- Large tilt hopper, hot galvanized, mm dimensions. 1000 x 2000 with protective cage.
- Switch and inverter to change the direction of rotation of the screw.
- Stainless steel cable.
- The last piece of the screw can be folded on a 3-metre-long cart;
- 3 intermediate bearings with Teflon rings to support the spiral with greaser
- Telescopic drawbar.
- Hitch ring to drag the screw on a carriage, 45 mm diameter.
- All machines are equipped with a plate, welded on the machine itself, which allows the identification of the screw;
- Assembly instructions.
-
Fiberglass shelter for 16-20 calves, Mod. SPHERIBOXC produced in polyester fiberglass with metal fence and complete with:
- Nr.1 Polyester fiberglass Box with high mechanical resistance.
- Nr.1 Hot galvanized steel fence for SPHERIBOXC.
- Nr.1 Front head feed racks with 8 cattle.
- Nr.2 Side head feed racks with 4 cattle (each one).
- Nr.1 Reinforcement arch in deep hot galvanized steel.
- Nr.2 Hay rack in deep hot galvanized steel for SPHERIBOXC.
- Nr.4 Nipple buckets holders (for 4 nipple buckets).
- Nr.4 Water buckets holders (for 4 water buckets).
- Nr.1 Spacing Bar.
- Nr.2 Large chimneys in fiberglass and galvanized steel for the natural aeration (Mod CAMET).
- Nr.2 Extendable side gates for the access to the interior of the fence.
- Nr.2 Lifting hook with reinforced counter-plate.
- Nr.4 Fiberglass feeders with supports in galvanized steel.
- Nr.16 Water Buckets.
- Nr.16 Nipple Buckets.
- Nuts, bolts and mastic for assembly.
- Assembly Instruction.
- White or green colors.
- Box: 4300 mm. X 4300 mm. X h. 2180 mm.
- Fence: 3830 mm. X 3420 mm. X h. 1150 mm
-
Fiberglass shelter for 12 calves, Mod. AGRIBOX12C produced in polyester fiberglass with metal fence and complete with:
- Nr.1 Polyester fiberglass Box with high mechanical resistance.
- Nr.1 Hot galvanized steel fence for AGRIBOX12C.
- Nr.1 Front head feed racks with 8 cattle;
- Nr.1 Hay rack in deep hot galvanized steel for AGRIBOX12C.
- Nr.2 Nipple buckets holders (for 4 nipple buckets).
- Nr.2 Water buckets holders (for 4 water buckets).
- Nr.1 Spacing Bar.
- Nr.2 Extendable side gates for the access to the interior of the fence.
- Nr.1 Lifting hook reinforced counter-plate.
- Nr.2 Back side sliding windows for aeration.
- Nr.2 Fiberglass feeders with supports in galvanized steel.
- Nr.8 Water Buckets.
- Nr.8 Nipple Buckets.
- Nuts, bolts and mastic for assembly.
- Assembly Instruction.
- White or green colors.
- Box: 4200 mm. X 3200 mm. X h. 1850 mm.
- Fence: 3100 mm. X 3420 mm. X h. 1150 mm
-
Fiberglass shelter for 3 calves, Mod. AGRIBOX3C produced in polyester fiberglass with metal fence and complete with:
- Nr.1 Polyester fiberglass Box with high mechanical resistance.
- Nr.1 Hot galvanized steel fence for AGRIBOX3C.
- Nr.1 Front head feed racks with 3 cattle;
- Nr.1 Hay rack in deep hot galvanized steel for AGRIBOX3C.
- Nr.3 Nipple buckets holders.
- Nr.3 Water buckets holders.
- Nr.1 Spacing Bar.
- Nr.3 Water Buckets.
- Nr.3 Nipple Buckets.
- Nr.1 Extendable side gate for the access to the interior of the fence.
- Nr.1 Lifting hook with reinforced counter-plate.
- Nr.1 Back side sliding window for aeration.
- Nr.1 Fiberglass feeder with supports in galvanized steel.
- Nuts, bolts and mastic for assembly.
- Assembly Instruction.
- White or green colors.
- Box: 2450 mm. X 1760 mm. X h. 1400 mm.
- Fence: 2080 mm. X 1710 mm. X h. 1150 mm.
-
Fiberglass shelter for 10 calves, Mod. AGRIBOX10C produced in polyester fiberglass with metal fence and complete with:
- Nr.1 Polyester fiberglass Box with high mechanical resistance.
- Nr.1 Hot galvanized steel fence for AGRIBOX10C.
- Nr.1 Front head feed racks with 8 cattle;
- Nr.1 Hay rack in deep hot galvanized steel for AGRIBOX10C.
- Nr.2 Nipple buckets holders (for 4 nipple buckets).
- Nr.2 Water buckets holders (for 4 water buckets).
- Nr.1 Spacing Bar.
- Nr.2 Extendable side gates for the access to the interior of the fence.
- Nr.1 Lifting hook reinforceded counter-plate.
- Nr.2 Back side sliding windows for aeration.
- Nr.2 Fiberglass feeders with supports in galvanized steel.
- Nr.8 Water Buckets.
- Nr.8 Nipple Buckets.
- Nuts, bolts and mastic for assembly.
- Assembly Instruction.
- White or green colors.
- Box: 3600 mm. X 3200 mm. X h. 1600 mm.
- Fence: 3100 mm. X 3420 mm. X h. 1150 mm
-
Fiberglass Shelter for a calve Mod. AGRIBOX1C XL produced in polyester fiberglass with metal fence and complete with:
- Nr.1 Polyester fiberglass Box with high mechanical resistance.
- Nr.1 Hot galvanized folding steel side fence for AGRIBOX1C XL.
- Nr.1 Front access gate with its bolt.
- Nr.1 Nipple bucket holder.
- Nr.1 Water bucket holder.
- Nr.1 Wood Spacing bar.
- Nr.1 Set of double anti-chocking device.
- Nr.1 Set of front wheels for the transport.
- Nr.1 Drag Handle in galvanized steel.
- Nr.1 Stainless steel trough for hay and feed.
- Nr.1 Bucket with nipple.
- Nr.1 Bucket for water.
- Nuts and bolts for assembly.
- Assembly Instruction.
- White or green color.
- Box: 2000 mm. X 1200 mm. X h.1420 mm.
- Fence: 1350 mm. X 1150 mm. X h. 930 mm
-
- Fiberglass rain collar for silos, Mod. PARAP
- Available in different diam., from 460 mm, 780mm to 980 mm.
-
- Transfer augers to convey granular fertilizer, cereal and seeds. To be mounted on all agricultural trailers.
- Equipped with hydraulic motors complete with a hand winch for lifting and all fittings for the assembly on trailer; supplied with 2 oil tubes of 5m each.
- The 4-metre version can be folded very easily and if it does not come used, it can be reclined against the wall of the dumpster.
- Available in hot deep galvanised steel or in stainless steel and diameter of 150mm or 200mm.
-
Cooling Box in fiberglass-coated polyurethane for deadstock Mod AGRICOOL120 and suitable for storing animal carcasses (chickens, piglets, lambs, rabbits) compose of:
- Cooling Box designed with a double layer of polyurethane fiberglass with 40mm thickness.
- Stainless steel accessories, rubber seal, engine-compound cooling evaporator system with special acid treatment.
- Top opening window of diam 400mm.
- A large front opening gate.
- Stainless steel step.
- 220-volt power for the cooling system;
- Engine cover produced in stainless steel with a double stainless steel ventilation grille;
- Temperature Adjustment from 10° to -12° degrees
- Digital box for temperature regulation;
-
- The weighing system AGRISCALE-SP201 is very simple and consists of load cells preassembled on a compatible tool for the legs of the silo and a digital weight indicator.
- Through the display, it can be read the level of the product contained in the silo in order to control immediately the product inside.
- In addition, the system automatically memorizes daily loads and unloads of the stored products up to 400 operations.
- The is available the version with 3-cell or 4-cell.
- The maximum range of each cell is 5000 KG
-
- Only device for silos cover with 1 hinge and 3 winglets, Mod. COP08
-
- Only fiberglass cover Mod. COPER/COPET.
- Available diam. from 480 mm 680 mm e to 830 mm.
- Available in white or clear color.
-
- Frame with pulley device to hold the rope for cover opening, Mod. POCAV
-
- Fiberglass cover with wind-proof opening system from the ground.
- Available diam. from 480 mm 680 mm e to 830 mm.
- Available in white or clear color.
-
- PE-vent valve to expel warm air from silos, Mod. AIRDUMPER
- Suitable to all fiberglass silos of the Agritech range with pneumatic filling system.
-
- Connector "fire brigade type" for pneumatic loading.
- Available in diam. from 89 mm 102 mm e to 114 mm.
- Produced in hot deep galvanized steel.
-
- Injection divider for the pneumatic filling of the silos.
- Produced in hot deep galvanized steel.
- Suitable to all fiberglass silos of the Agritech range with pneumatic filling system.
-
- Compensation plates for leg of silos;
- Dimensions: 200mm x 200mm;
- Produced in hot deep galvanized steel .